How To Clear F9 Code

Since the door did not physically lock open the door and locate the door light switch plunger.

How to clear f9 code. Unplug the oven for 30 seconds and. When the clean cycle starts what 30 seconds to a minute and press cancel. A copy of the reference model and code displayed on.

Open the oven door and check the door latch. Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch. If it continues to display F9 I recommend service.

Power unit up by turning on the circuit breakers. Power unit down by turning off the circuit breakers for one 1 minute. Read the full answer.

Reset the Oven. If there is NO water in the unit make sure the valves are turned on all the way. Push and hold the door light plunger in and then press ClearOff while continuing to press in on the door plunger.

Hold on the StartStop button for 10 seconds. How to fix error code F9 on a whirlpool stove. After kicking off the self-cleaning the display read dr beeped several times and the door locked indicator flashed.

FH - Detects No Water Entering Machine or No Pressure Switch Trip - Select cancel twice to clear this code. Holding the stopclear button stops the beeping temporarily but it then goes though the same cycle again and gets stuck at F9. Resetting the oven by disconnecting the power for five minutes will demagnetize the circuitry and resolve the F9 error.