How To Dry Out A Charging Port

If you want it to dry better get a bag of uncooked rice and leave the phone.
How to dry out a charging port. Wait for moisture to evaporate. If you try to connect your phone or tablet to the charger while the charging port is wet you will hear an alarm go off with. Use 90 isopropyl alcohol or electronic parts cleaner and a toothbrush to clean the port.
Using this Vacuuming method is the quickest simplest easiest way to dry out your phone or get moisture out of your charge port as far as i know. If you get the same its the hardware so theres some kind of moisture dmg. If you got a hairdryer use it to blow mildly hot air at slow or moderate speed into the USB port from different angles for a.
Then just leave it out to dry. I have used this simple fix many many times. You can do this process for the USB port of the phones charging cable.
First go into safe mode and find out if its a hardware or software problem. It takes almost one or two hours to evaporate the moisture or water from the USB port. If you see the alert again there is still liquid in the Lightning port or under the pins of your Lightning cableLeave your iPhone in a dry area with some airflow for up to a day.
This is normally enough to. This sound alarm will only stop once the system detects that youve disconnected the charging port. Then use a soft cloth or a clean T-shirt and try to wipe inside the charging port hole if you can.
Just leave it a dry room for about 30mins or so. While in safe mode try the charger. Turn off your device and use the can of compressed air or the bulb syringe to clean out the charging port.



















