How To Install Atx Power Supply

When you press the power button on your case it jumps the green wire to a ground telling the PSU to turn on.
How to install atx power supply. This cut out is made for ATX power supply units and therefore any brand of power supply will fit perfectly into place. Take your power supply and slide it towards the back of the case so that the screw holes on power supply unit align with the holes on the case. If you are installing your fanless power supply into the top section of your case it is recommended to mount the power supply with the ventilation top cover facing UPWARD only if there is enough space at least 5 cm available between.
You have to make sure that one of the given plate matches aligns with the m. A good power supply should have fail-safes built in not just to protect the PSU itself but also to keep your system safe in case of something unexpected like a power surge. Plug the 6pin PCIE port to HS1-PLUS OR BOX Power port.
The green wire on ATX plug is the power on line and is pin 14. Back from a long hiatus is another helpful How-To Tutorial. 2 When the PSU is inserted into the location The holes will line up as shown below.
The power supply should have a distinct back with plugs and a fan as well as a bottom with a fan on it. Insert the power supply. We secured the new power supply with four screws as soon as we put it back in which means there should be two screws rolling.
This is a full-on fleshed-out how-to video on installing a PSU in a PC. Replacing the power supply required removing 6 screws in all two to release the side of the case and four to remove the old power supply. One of them is the 500W Assassin power supply with 8 pin cpu connector.
Molex Connector - This is the IDE connector that supplies power to your hard drives and cdroms. We have several power supplies that carry this connector. Choosing the right power supply for your needs and skill-level can be a troublesome task.



















